Lead4pass HPE6-A72 Dumps Latest Learning Materials Updated

To help you better prepare for the HP HPE6-A72 exam, we’ve put together comprehensive HPE6-A72 dumps with the latest learning materials.

Use Lead4pass HPE6-A72 dumps (Latest Version) https://www.leads4pass.com/hpe6-a72.html to help you pass the Aruba Certified Switching Associate exam, two modes to choose PDF or VCE. Have 88 new HPE6-A72 exam questions and answers.

Lead4pass HPE6-A72 dumps the latest version

Free Providing HPE6-A72 Dumps With New Update Exam Questions

Question 1:

Core# configure terminal Core(config)# vrf Green Core(config-vrf)# exit Core(config)# Core(config)# interface vlan 50 Core(config-if-vlan)# ?

Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) VLAN 50 to the VRF created?

A. Core(config-if-vlan)# vrf attach Green

B. Core(config-if-vlan)# ip VPN-instance Green

C. Core(config-if-vlan)# ip vrf forwarding Green

D. Core(config-if-vlan)# routing-context Green vrf

Correct Answer: A

Question 2:

Refer to the exhibit.

Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?

A. 11010101

B. 10110001

C. 01001011

D. 11111000

Correct Answer: A

Question 3:

What is the correct description of a Multi-Layer Switch?

A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

B. any switch that supports PoE, LLDP-MED, and Flow Control

C. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

D. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

Correct Answer: C

Question 4:

What is true about VSX? (Choose two.)

A. VSX is ideal for Campus access layer deployments where ease of deployment is needed.

B. VSX allows upgrading members with near-zero downtime or loss of packets.

C. VSX is available on all Aruba OS-CX switches except the 6300F model.

D. VSX is implemented on static port switches. VSX-plus needed to stack chassis together.

E. VSX runs separate control planes to reduce latency and improve performance.

Correct Answer: BE

Question 5:

ServiceOS login: admin

SVOS> password

Enter password: ********

Confirm password: ********

The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.

What is the default password that is required for the admin account while under the Service OS console?

A. No password is set for this account.

B. “Password”

C. “forget me!”

D. The same login password that has lost originally.

Correct Answer: C

Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm

Question 6:

Refer to the exhibit.

The Aruba 8400 in the exhibit is member 2 of a VSX stack.

Which command will enter the interface subconfiguration mode for the port, indicated by the orange square?

A. 8400(config)# interface 2/4/15

B. 8400(config)# interface 1/7/16

C. 8400(config)# interface 1/4/15

D. 8400(config)# interface 2/3/17

Correct Answer: A

Question 7:

What are two features of the three-tier designs? (Choose two.)

A. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments

B. adds a distribution layer to free up resources from the Core for improved performance and routing throughput

C. a more scalable design by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments

D. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer

E. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided

Correct Answer: BC

Question 8:

Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2. Which statement is true regarding how Switch-A will forward the packet?

A. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

B. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

C. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.

D. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

Correct Answer: D

Question 9:

The section in blue can be ignored.

SW1(config)# interface 1/1/1-1/1/2 SW1(config-if-<1/1/1-1/1/2)# vlan access 2 SW1(config-if-<1/1/1-1/1/2)# exit SW1(config)# interface 1/1/11-1/1/17 SW1(config-if-<1/1/11-1/1/17)# vlan access 17 SW1(config-if-<1/1/11-1/1/17)# exit

After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: D

Question 10:

What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)

A. Router ID

B. Priority

C. Hello and Dead intervals

D. Area ID

E. Process ID

Correct Answer: CD

Question 11:

Your customer has 349 users in a two-story building.

What are two benefits of a 2-Tier design? (Choose two.)

A. Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.

B. Improved performance by offloading processing from the Access layer to the Core.

C. Use of layer 2 switches at the access layer can process and route traffic from attached APs.

D. Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.

E. Provides a more cost-effective solution given that no additional switches are required for a third tier.

Correct Answer: AE

Question 12:

Which two options are the Layer 3 Routing protocols? (Choose two.)

A. BGP

B. LLDP

C. OSPF

D. MPLS

E. 802.3ad

Correct Answer: AC

Question 13:

What are the commands to disable SSH and HTTPS services from the default VRF?

A. Core-1(config)# no ssh server Core-1(config)# no https-server

B. Core-1# no ssh server vrf default Core-1# no https-server vrf default

C. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable

D. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default

Correct Answer: D

Question 14:

What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)

A. routing loops

B. costs associated with upgrading from copper to fiber

C. multiple frame copies leading to instability of the MAC address table

D. security issues with a redundant loop indicating to hackers that a back door exists

E. broadcast storms

Correct Answer: CD

Question 15:

What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on the next reboot?

A. copy running-config checkpoint startup-config

B. copy startup-config running-config

C. copy running-config initial-checkpoint

D. copy running-config default

Correct Answer: A

The above 15 questions are only partial, and the complete ones also need to be obtained by visiting Lead4pass HPE6-A72 dumps.

The success of the HPE6-A72 exam is inseparable from the help of good study materials, and the use of updated Lead4pass HPE6-A72 dumps is a smart choice, to pass the HPE6-A72 exam easily.

For more HPE6-A72 exam questions, please select the latest HPE6-A72 dumps https://www.leads4pass.com/hpe6-a72.html (Welcome to visit).