Latest Popular HP HPE2-W09 Exam Success Methods

Here is a helpful HP HPE2-W09 Exam Success Method for all Candidates!

HP HPE2-W09 Exam Success Methodology has many:

1. Purchase learning videos
2. Participate in discussion groups
3. Buy books for self-study
4. Participate in an official training program
5. Find free exam resources
6. Using HP HPE2-W09 dumps: https://www.leads4pass.com/hpe2-w09.html (79 Q&A)

There is the keyword “popular” in my title! Yes, I only introduce the most popular method: HP HPE2-W09 dumps.

Because no matter what method you use, the ultimate goal is to obtain the test resources that are really suitable for you. Among all the methods, the most practical one is HP HPE2-W09 dumps, because it contains two learning formats, PDF and VCE,
You can download the HPE2-W09 dumps PDF to learn, or use the HPE2-W09 dumps VCE to help you simulate exercises!

Part of HP HPE2-W09 exam questions online practice test:

QUESTION 1:

The architect designs a spine and leaf network for a single data center that will use multiple leaf switches as Virtual Tunnel End Points (VTEP). The architect needs to select the type of Integrated Routing and Bridging (IRB) for the solution.

Is this statement about the IRB type true?

Solution: In the Asymmetric IRB egress VTEPs bridge the traffic to the destination networks.

A. Yes

B. No

Correct Answer: B

QUESTION 2:

Is this a guideline for establishing a Virtual Switching Extension (V5X) Inter-Switch Link (ISL) between two ArubaOS-CX switches? Solution: Use the same speed on every link In the ISL.

A. Yes

B. No

Correct Answer: A

QUESTION 3:

The architect designs a spine and leaf network for a single data center that will use multiple leaf switches as Virtual Tunnel End Points (VTEP). The architect needs to select the type of Integrated Routing and Bridging (IRB) for the solution.

Is this statement about the IRB type true?

Solution: Asymmetric IRB requires a third L3 VNI to route packets between ingress and egress VTEPs.

A. Yes

B. No

Correct Answer: A

QUESTION 4:

Refer to the exhibit.

The company wants AtubaOS-CX switches to provide VXLAN services for several VMs and servers, as shown in the exhibit. Hypervisors will not run VXLAN for this solution. Is this part of a valid configuration to meet the requirements?

Solution: Attach VNIs 5010 and 5020 to interface 1/1/3 on Switch-2.

A. Yes

B. No

Correct Answer: A

QUESTION 5:

Is this a way that a data center technology can help meet requirements for multi-tenancy?
Solution: Virtual Extensible LAN (VXLAN) provides millions of IDs to scale for the needs of a multi-tenant environment

A. Yes

B. No

Correct Answer: B

QUESTION 6:

Is this a use case for deploying Ethernet Ring Protection Switching (ERPS)?
Solution: extending Layer 2 communications between data centers that connect over Layer 3 MPLS links

A. Yes

B. No

Correct Answer: B

QUESTION 7:

Refer to the exhibits.

Is this how the switch-1handles the traffic?

Solution: A broadcast arrives in VLAN 10 on Switch-1. Switch 1 forwards the frame on all interfaces assigned to VLAN 10, except the incoming interface. It encapsulates the broadcast with VXIAN and sends it to 192.168.1.3, not 192.168.1.2.

A. Yes

B. No

Correct Answer: A

QUESTION 8:

Refer to the exhibit.

You want to enable devices in VRF B and VRF C to reach shared resources in VRF A. Is this a valid strategy for meeting this goal? Solution: Place ad three VRF$ in the same OSPF process on Switch-1.

A. Yes

B. No

Correct Answer: B

QUESTION 9:

Your task is to configure an EVPN solution for a dual-stack IPv4 and IPv6 protocol in the overlay networks. Is this statement about EVPN and IPv6 correct? Solution: The IPv6 and IPv4 overlay networks can be encapsulated with VXLAN and transmitted through the underlay network.

A. Yes

B. No

Correct Answer: B

QUESTION 10:

Refer to the exhibits.

Is this how the switch-1handles the traffic?

Solution: A broadcast arrives in VLAN 10 on Switch-1. Switch 1 forwards the frame on all interfaces assigned to VLAN10. except for the incoming interface. It replicates the broadcast and encapsulates each broadcast with VXLAN. and sends the VXLAN traffic to 192.168.1.2 and 192.168.1.3.

A. Yes

B. No

Correct Answer: B

QUESTION 11:

You enter this command on an ArubaOS-CX switch:

Switch# show erps status ring 1

Is this what the specified status means?

Solution: The status is Protection, which means that the ring is up and fully connected with the RPL port blocked.

A. Yes

B. No

Correct Answer: B

QUESTION 12:

Refer to the exhibit.

Switch-1 and Switch-2 ate ArubaOS-CX switches that implement VXLAN WITHOUT EthernetVPN (EVPN). Switch-2 uses the same VNI-to-VLAN mappings as Switch-1. Is this how the specified servers communicate? Solution: The first time that Server I communicates with Server 3, It sends an ARP request to resolve Server 3\’s MAC address.

A. Yes

B. No

Correct Answer: A

QUESTION 13:

Two ArubaOS-CX switches ate part of a Virtual Switching Extension (V5X) fabric. Is this a guideline for configuring the switches\’ link-up delay settings? Solution: Set the link-up delay timer based on the number of MAC forwarding, ARP, and routing table entries.

A. Yes

B. No

Correct Answer: B

…

PS. Download the latest HP HPE2-W09 exam questions: https://drive.google.com/file/d/14jCQVJizqZJIc8_0F3heDVwFgRwJkFdT/

Final conclusion:

The most popular HP HPE2-W09 Exam Success Method is to use Lead4pass HPE2-W09 dumps:https://www.leads4pass.com/hpe2-w09.html,
Because it is most suitable to help candidates practice before the exam and is 100% guaranteed to help you pass the HP HPE2-W09 Exam successfully.

Copyright Notice: The original article was edited and published by hpexamdumps.com with the consent of Lead4Pass! Anyone who copies it is a pirated copy.