Lead4pass HPE6-A47 Dumps Actual Exam Material Updated Feb 2021

Looking forward to passing the HP HPE6-A47 exam? We at Lead4pass provide you with the latest and most accurate HPE6-A47 dumps actual exam material to help you prepare for the Designing Aruba Solutions exam.

Lead4pass provides the latest exam questions for the HP HPE6-A47 exam. Lead4pass HPE6-A47 dumps https://www.leads4pass.com/hpe6-a47.html with PDF and VCE, real HPE6-A47 exam material test questions and Answers 68+, 100% high quality and accuracy. Pass the exam with ease.

Share HPE6-A47 Actual Exam Material Questions

Total number of free questionsFromLatest update
15 Lead4pass HPE6-A47 dumps2021

Questions are from HPE6-A47 free dumps

Question 1:

Which guidelines should an architect use to determine how many AirWave servers to recommend?

A. One server should be deployed on every subnet with an infrastructure device.

B. One server is recommended for the base features and one server each for add-on features such as Clarity.

C. One server should be dedicated to the wired infrastructure and one server to the wireless infrastructure.

D. One server should monitor and manage up to about 4,000 infrastructure devices.

Correct Answer: A


Question 2:

An architect plans to purpose an Aruba wireless solution with several Mobility Controllers (MCs) and a Mobility Master (MM) architecture. Wireless users run Skype for Business, a Unified Communications (UC) solution. The architect plans to use the Aruba SDN capabilities to integrate with the UC solution.

What helps to support high availability specifically for the SDN services?

A. a redundant master MC

B. backup controllers defines on the APs

C. a cluster deployment for MCs

D. a redundant MM

Correct Answer: D


Question 3:

Refer to the exhibit.

Exhibit 1 shows the logical plan, and Exhibit 2 shows the BOM created with IRIS. An architect plans to propose two 5406Rzl switches as a VSF fabric for a campus network core. Which issue with the plan should the architect correct?

HPE6-A47 free dumps questions 3

A. Add two QSPF+ MP0 SR4 transceivers.

B. Change the v2 modules to v3 modules.

C. Add stacking modules and cables.

D. Change the power supply type.

Correct Answer: B


Question 4:

An architect needs to plan the bandwidth for two Aruba 7240 Mobility Controllers (MCs) which will connect to the network core. The customer indicates that four 10 GbE links between the network core and the data center will be adequate. The customer expects almost all traffic in the network will be wireless. The customer expects up to 25 Gbps upstream traffic from wireless clients and up to 35 Gbps downstream to wireless clients. The customer requires the MCs to be able to continue to forward traffic if up to one link fails, but lower performance during the failover situation is permissible.

What are the minimal links to meet these requirements?

A. two 10 GbE links on each of the MC

B. two 40 GbE links in each of the MCs

C. three 10 GbE links on each of the MCs

D. four 10 GbE links on each of the MCs.

Correct Answer: B


Question 5:

An architect learns that a customer site is 14,307 square meters (154,000 square feet) and supports 900 employees using WiFi 5 GHz radio. What additional information should the architect collect to create the RF plan?

A. number of devices used by each user

B. the OS used on wireless devices

C. whether BLE wayfinding is required

D. software version on Mobility Controllers (MCs)

Correct Answer: A


Question 6:

An architect needs to help a customer design a management and monitoring solution for an Aruba network

in an airport. The solution consists of an Aruba Mobility Master (MM), Aruba 7210 MCs, Aruba AP-335s,

and Aruba 5496R switches.

The architect plans to recommend Aruba AirWare.

The airport has a high-client device turnover and many highly mobile devices. Which changes should the

Does the architect make the recommended solution based on this characteristic?

A. Recommend additional hardware resources beyond those recommended for the typically tested AirWare platform.

B. Recommend extra AirWare device licenses to support the changing number of client devices.

C. Recommend Aruba Central with a Clarity subscription as a more flexible cloud-based solution.

D. Recommend Aruba Central with guest access licensing to increase guest visibility.

Correct Answer: B


Question 7:

An architect proposes four 7210 Mobility Controllers (MCs) to support about 1,500 client APs. The customer environment will have a maximum of about 20,000 wireless clients. The customer wants hardware MMs with active and standby deployment.

What is the minimum solution that meets the customer’s requirements?

A. two MM-HW-10K appliances

B. two MM-HW-5K appliances

C. four MM HW-5K appliances

D. four MM HW-10K appliances

Correct Answer: B


Question 8:

A financial institution has an Aruba wireless system. Each floor is 19 meters by 23 meters (200 feet by 250 feet) and has 20 APs. The organization now requires dedicated Air Monitors (AMs).

About how many AMs should the architect recommend per floor?

A. about 1 or 2 per floor

B. about 3 to 5 per floor

C. about 10 to 12 per floor

D. about 16 to 20 per floor

Correct Answer: A


Question 9:

A customer needs a solution to terminate VPN tunnels for Aruba RAPs. The customer has a single site and a single public IP address for this purpose. Network address translation (NAT) will forward the IPsec traffic to the correct device to terminate the VPN tunnel. The customer also requires N+1 redundancy for the solution.

Which solution meets the customer’s requirements?

A. two Aruba MCs on the same subnet that uses VRRP without clustering

B. two Aruba MCs deployed as a Layer 3 cluster

C. two Aruba MCs on different subnets that use VRRP without clustering

D. two Aruba MCs deployed as a Layer 2 cluster

Correct Answer: B


Question 10:

An architect needs to plan the RF coverage.

Which application has the greatest potential impact on RF design?

A. print

B. email

C. voice

D. secure web browsing

Correct Answer: D


Question 11:

For which scenario should an architect recommend Aruba Central Managed Portal (MSP)?

A. for a service provider who needs to monitor multi-vendor environments

B. for an enterprise that needs to manage data center services together with the network

C. for a service provider who needs to manage multiple customer networks

D. for an enterprise with many branches that needs to manage services centrally

Correct Answer: D


Question 12:

The customer has an office environment with users who have laptops that can connect with wired or wireless. Users also bring one or two of their own devices. An architect creates a proposal with Aruba AP325s, 7210 Mobility Controllers (MCs), a Mobility Master (MM), and Aruba 2930M switches at the access layer to support the laptops and APs.

The architect plans to recommend 802.1X authentication without tunneled node on Aruba 2930M switch ports that connect to laptops.

What is one advantage of this form of authentication?

A. ensures that Aruba firewall policies apply to wired user traffic.

B. prevents users from connection attempts with more than three devices

C. enables user access control and ensures only authorized users connect.

D. provides a second layer of protection for wireless users at the internal perimeter

Correct Answer: C


Question 13:

An architect proposes an Aruba solution with a hardware Mobility Master (MM) to a customer. The customer has a disaster recovery site which is connected to the main site at Layer 3. The customer requires the MM to remain available in case of a total site failure.

Which plan meets the customer’s requirements?

A. Deploy a hardware MM to the disaster recovery site and set up VRRP between them.

B. Deploy a hardware MM to the disaster recovery site and set its IP address as the standby master for MCs.

C. Deploy the virtual MM (VMM) to the disaster recovery site and set the VMM IP address to the same address as the hardware MM.

D. Deploy the virtual MM (VMM) to the disaster recovery site and configure clustering on the hardware and software appliances.

Correct Answer: A


Question 14:

A customer requires APs that meet these minimal criteria:

1. Support for MU-MIMO

2. Support for up to four spatial streams, both when MU-MIMO is used and when it is not used

3. Support for transmissions to up to three MU-MIMO clients at the same time

The architect finds these specifications for the two models under consideration: AP-335 = 4×4:4:4:4:3 AP-325 = 4×4:4:4:3:3

What should the architect determine from these specifications?

A. The AP 335 and the AP 325 do not meet the customer’s requirements, so consider a different model.

B. AP 325 meets the customer requirements, but AP 335 does not.

C. Either the AP 335 or the AP 325 meets the customer’s requirements.

D. AP 335 meets the customer requirements, but AP 325 does not.

Correct Answer: C


Question 15:

What typically drives the need for an aggregation layer in modern networks?

A. insufficient fiber cabling, especially between buildings

B. lack of high-speed uplink capabilities at the access layer

C. simplification of spanning tree protocol ad the access layer

D. need to extend VLANs across wider areas

Correct Answer: C


 

Finally,

To pass the HPE6-A47 exam easily, all you need to do is get the updated Lead4pass HPE6-A47 dumps exam materials https://www.leads4pass.com/hpe6-a47.html with PDF and VCE (HPE6-A47 exam questions) for the amazing Designing Aruba Solutions HPE6-A47 exam

Previous post Lead4pass HPE2-E72 Dumps Actual Exam Material Updated Jan 2021
Next post Lead4pass HPE0-J57 Dumps Actual Exam Material Updated March 2021